HEIDENHAIN iTNC 530 HSCI - Enccyc. Zipname =

1694 HEIDENHAIN Technical Manual iTNC 530 HSCI
ENCCYC.
ZIPNAME =
The possibility of machining with or without preset tables in OEM cycles can
also be used with the encrypted PLCE partition. A separate directory is created
on the PLCE partition for each cycle project (PLCE:\OEMCYC_ZIP\,
PLCE:\OEMCY2_ZIP\, etc.), just as is done on the PLC partition. In the
OEM.SYS, enter after the code word the name of the *.ZIP file to be
unpacked. For example, this is for the
PLCE partition: ENCCYC.ZIPNAME = ABC.ZIP, ENCCY2.ZIPNAME = DEF.ZIP, etc.
The *.ZIP files contain all information for the cycles, including the directory
structure. When the control is started up, the appropriate *.ZIP files are
unpacked in the folders. The documentation for CycleDesign contains more
detailed information.