HEIDENHAIN iTNC 530 HSCI - Possible Settings

1696 HEIDENHAIN Technical Manual iTNC 530 HSCI
Possible settings In the PLC mode of operation, press the ADVANCED SETUP soft key and then
the ENCRYPTED DRIVE soft key to call the settings of the encrypted partition.
The following information and options are available on the Password tab:
Password – State:
Display Meaning
No password Active if you have not yet
assigned a password to the
PLCE: partition.
Password stored in OEM.SYS Active if the password for
the PLCE: partition is saved
in the OEM.SYS file.
Password stored in SIK Active if the password for
the PLCE: partition is saved
in the SIK.