1700 HEIDENHAIN Technical Manual iTNC 530 HSCI
To mount the encrypted partition, press the Mount button and then press the
Apply button.
The control confirms that the PLCE: partition has been mounted by displaying
the message Encrypted drive has been mounted and changes the status
under State to indicate that the partition has been mounted.
Access to PLCE:
by the user
The control operator cannot access the mounted PLCE: partition until he has
entered the correct password for the PLCE partition.
While in the Programming and Editing operating mode, press the MOD key.
Enter the password for the encrypted PLCE: partition.
If you then press the PGM MGT key, the iTNC displays the PLCE: partition in
the directory structure on the left side of the screen.
If the PLCE partition is displayed in the File Management, files and data can be
handled in the same way as in all other partitions (e.g. move, delete, rename).
Encryption is automatic.
All data stored on the PLCE: partition are lost during the formatting process.
To Next Page
Loading...
