HEIDENHAIN iTNC 530 HSCI - 9.8 Command Set; Command Set; Overview

1758 HEIDENHAIN Technical Manual iTNC 530 HSCI
9.8 Command Set
9.8.1 Overview
The following table provides an overview of all commands explained in this
chapter:
Group of
functions
Syntax Function
Loading and saving commands
L Load
LN Load NOT
L– Load two’s complement
LB Load BYTE
LW Load WORD
LD Load DOUBLE WORD
= Assignment
B= Assign BYTE
W= Assign WORD
D= Assign DOUBLE WORD
=N Assign NOT
=– Assign two’s complement
Setting commands
SSet
R Reset
SN Set NOT
RN Reset NOT
Logical operations
AAnd
AN And NOT
Oor
ON Or NOT
XO Exclusive OR
XON Exclusive OR NOT
Arithmetic commands
+ Addition
– Subtraction
x Multiplication
/ Division
MOD Remainder