HEIDENHAIN iTNC 530 HSCI - Addition (+); Initial State: Constant = 10 000 (Dec) Word W6 = 200 (Dec) Double Word D8; Function STL Accumulator Operand Content; Load the Constant into the L 10000 Word Accumulator

July 2013 9.8 Command Set 1787
9.8.24 ADDITION (+)
Syntax: + (PLUS)
Operands: B, W, D, K
Action:
The iTNC extends the operand to the width of the accumulator (32 bits) and
then adds the content of the operand to the content of the word accumulator.
The result of the operation is stored in the word accumulator where you can
process it further.
Example:
Add the constant and the number saved in word W6, then assign the result to
double word D8.
Initial state:
Constant = 10 000 (dec)
Word W6 = 200 (dec)
Double word D8 = ?
Function STL Accumulator
content
Operand content
Load the constant into the
word accumulator.
L
K10000
10000
Add the content of the
word accumulator and
word W6.
+ W6 10200 200
Assign the result to
double word D8.
= D8 10200 10200