HEIDENHAIN iTNC 530 HSCI - LESS than or EQUAL to Command for String Processing (<=)

1826 HEIDENHAIN Technical Manual iTNC 530 HSCI
9.10.8 LESS THAN OR EQUAL TO Command for String Processing (<=)
Syntax: <= (LESS EQUAL)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator is less than or equal to the operand, the
condition is true and the iTNC sets the logic accumulator to 1. If the string
accumulator is greater than the operand, it sets the logic accumulator to 0.
Example:
See command <>.
9.10.9 GREATER THAN OR EQUAL TO Command for String Processing (>=)
Syntax: >= (GREATER EQUAL)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator is greater than or equal to the operand, the
condition is true and the iTNC sets the logic accumulator to 1. If the string
accumulator is less than the operand, it sets the logic accumulator to 0.
Example:
See command <>.