July 2013 10.3 Connecting the iTNC to the Network 1891
DHCP client
settings
Client settings
In this window you can enter the names of all devices (overwrite).
Dialog Option Meaning
Client
settings
MAC address: MAC address of the client
IP address: IP address of the client
DHCP client
settings
Name:
Here you can overwrite the host name of the device. The DHCP
server tries to set the host name of this device as indicated here.
It depends on the device, however, whether it will really change
its name as specified by the DHCP server. On most devices the
name must be specified in the device itself, or at least the
configuration in the device must be modified such that the
device retrieves its host name from the DHCP. Regardless of
whether the device itself changes its name as specified, this IP
address name is entered in the name server on the MC, and
therefore this name must be used to access the device in the
network.
TFTP client
settings
Currently not yet supported. Preparation for future expansions.
Start SSH service Currently not yet supported. Preparation for future expansions.
To Next Page
Loading...
