30 HEIDENHAIN Technical Manual iTNC 530 HSCI
Write protection for lines of the preset table
Lines in the preset table of the TNC can now be write-protected by the user.
A write protection for individual lines or entire areas (e.g. PR.LINESLOCKED =
1,4-8,22) in the preset table can now be set by an entry (PR.LINESLOCKED =)
in the TNC:\TNC.SYS file. Write-protection can be activated only for the first
255 lines of the preset table. Protected lines are indicated in the editor by a
different color.
Automatic connection of network drives
The waiting time for the automatic connection (mounting) of network drives
was increased. Up to now, after start-up of the operating system the control
tried to connect the network drives automatically for approx. 7 seconds.
Now it keeps trying for up to a minute. In this way, the automount succeeds
even when a device in the network (e.g. a switch in the machine) does not
start up until the machine switches on.
Backing up and restoring operating system settings
During backup and restoring via TNCremo or TNCcmd, the following
operating system settings are now also saved and restored:
• System time settings via Settings/Date/Time dialog
• Language settings via Settings/Language dialog
• Network settings via Settings/Network dialog
• Settings for the connected network drives via Settings/Shares dialog
• Settings of the VNC server via Settings/VNC server
• Screen saver settings via Settings/Screen Saver dialog
• Settings of the XFCE Window Manager via Settings/
WindowManagerConfig dialog
• Settings of the diagnostic tools under HELogging
• Settings of the Remote Desktop Manager
To Next Page
Loading...
