HEIDENHAIN iTNC 530 HSCI - Page 402

402 HEIDENHAIN Technical Manual iTNC 530 HSCI
The cable adapter includes plug-in terminal strips for the contacts of the
emergency stop button and permissive button (max. load 24 V–, 1.2 A).
The plug-in terminal strips are supplied together with the adapter cable. If you
have an immediate need for these terminal strips, they can be ordered in
advance. See the "Additional components" table below.
Wiring of the contacts for the emergency stop button and permissive button:
MP 7645.3 = 0
X1
X2
Emergency-Stop
Permissive Button B
Permissive Button A
Contact 2
Contact 1
Contact1
Contact 2
ConatctA+B
Conatct B
Contact A
Cable Adapter
MP 7645.3 = 1
X1
X2
Contact 2
Contact 1
Contact1
Contact 2
ConatctA+B
Conatct B
Contact A
Emergency-Stop
Permissive Button B
Permissive Button A
Cable Adapter
Additional components ID
Connecting cable
Spiral cable 312879-01
Normal cable 296467-xx
Metal armor tubing 296687-xx
Plug-in terminal strips for advance ordering
4-pin terminal block 266364-12