July 2013 4.1 What is a Machine Parameter? 475
4 Machine parameters
4.1 What is a Machine Parameter?
A contouring control must have access to specific data (e.g., traverse
distances, acceleration) before it can execute its programmed instructions.
You define these data in machine parameters.
This list of machine parameters is divided into groups according to topic.
Machine parameters Topics
10 to 999 Encoders and machines
1000 to 1399 Positioning
1400 to 1699 Operation with velocity feedforward control
1700 to 1999 Servo control with following error
2000 to 2999 Integrated speed and current control
3000 to 3999 Spindle
4000 to 4999 Integrated PLC
5000 to 5999 Data interface
6000 to 6199 3-D touch probe
6500 to 6599 Tool measurement with triggering touch probe
7100 to 7199 Tapping
7200 to 7349 Display and programming
7350 to 7399 Colors
7400 to 7599 Machining and program run
7600 to 7699 Hardware
To Next Page
Loading...
