HEIDENHAIN iTNC 530 HSCI - Page 50

50 HEIDENHAIN Technical Manual iTNC 530 HSCI
Dialog Option Meaning
VNC
settings
Overview of the VNC settings
Computer name: IP address or computer name
VNC: Connection of the client to the VNC viewer
VNC Focus The VNC client participates in the focus assignment
Type  Manual
Manually entered VNC client
 Denied
This VNC client is not permitted to connect
 TeleService/IPC 61xx
VNC client via TeleService connection
 TFTP
Currently not yet supported. Preparation for future expansions.
 DHCP
Other computer that retrieves an IP address from this computer
 Add
Add new VNC viewer/client
 Remove
Deletes the selected client. Possible only for clients that were
entered manually.
 Edit
Edit the configuration of the selected client
 Refresh
Updates the display. Necessary during connection attempts
while the dialog is open.
Global settings
Enabling
TeleService/IPC
61xx
Connection via TeleService/IPC 61xx is always permitted
Password
verification
The client must enter a password for verification. If this option is
active, the password must be entered when the connection is
established.
Enabling other VNC
Deny Access generally denied to all other VNC clients.
Inquire During connection attempts a corresponding dialog is opened.
Permitted Access is generally granted to all other VNC clients.
VNC Focus Settings
Enabling VNC
focus
Enable focus assignment for this system. Otherwise there is no
central focus assignment. In the default setting, the focus is
actively reassigned by the owner of the focus by clicking the focus
symbol. This means that the owner of the focus must first release
the focus by clicking the focus symbol before any other client can
retrieve the focus.