HEIDENHAIN iTNC 530 HSCI - Page 501

July 2013 4.4 List of machine parameters 501
MP920.x Negative software limit switches, traverse range 1 (default
setting after power on)
Input: –99 999.9999 to +99 999.9999 [mm] or [°]
PLC
RUN
628
MP921.x Negative software limit switches, traverse range 2
Input: –99 999.9999 to +99 999.9999 [mm] or [°]
PLC
RUN
628
MP922.x Negative software limit switches, traverse range 3
Input: –99 999.9999 to +99 999.9999 [mm] or [°]
PLC
RUN
628
MP950.x Datum for positioning blocks with M92 for axes 1 to 9
Input: –99 999.9999 to +99 999.9999 [mm] or [°]
Values with respect to the machine datum
PLC
RUN
1207
MP951.x Simulated tool-change position for TOOL CALL during mid-
program startup (block scan)
Input: –99 999.9999 to +99 999.9999 [mm] or [°]
PLC
RUN
1246
MP960.x Machine datum
Input: –1.79769313486E+308 to
+1.79769313486E+308 [mm] or [°]
Values with respect to the scale reference point
PLC
RUN
802,
1207
MP Function and input Software
version and
behavior
Page