HEIDENHAIN iTNC 530 HSCI - Page 672

672 HEIDENHAIN Technical Manual iTNC 530 HSCI
Constants or links to a nonlinear relationship can be entered in the column
COMPTAB.
Entering a constant
Invariable deviations (not dependent on axis position or temperature) can be
entered directly in the column COMPTAB. The unit is [mm] or [°].
Example: The B axis is rotated by x in the machine coordinate system (error
A0B).
NR KEY AXIS COORD COMPTAB
...
Trans X 0.016
Trans Z 250.051
MachAxis B
Trans A 0 0.0015
MachAxis Y
MachAxis X
MachBase
MachAxis Z
Trans X -298.923
Trans Y 200.172
MachAxis C
...
[END]