July 2013 6.4 Axis-error compensation 687
Position errors of
spindle
Error model using a position error of the spindle in tool axis direction Z
without rotary head axes – Recommendation for transformation chain:
Error model using a position error of the spindle in tool axis direction Z
with rotary head axes – Recommendation for transformation chain:
NR DOC KEY AXIS COORD COMPTAB
TOOLFILE
ToolAxis Z
A0S Trans A xxx
B0S Trans B xxx
...
[END]
NR DOC KEY AXIS COORD COMPTAB
TOOLFILE
ToolAxis Z
A0S Trans A xxx
Trans ...
...
MachAxis B xxx
...
[END]
To Next Page
Loading...
