HEIDENHAIN iTNC 530 HSCI - Page 719

July 2013 6.5 Tilting and swivel axes 719
 Enter a brief descriptive text for the kinematics selection dialog.
The texts displayed for selecting the kinematics can be created as language-
sensitive texts (even with UTF8 character set). The window for selecting the
kinematics is opened after the keyword KINEMATIC is entered.
In the DOC column of the kinematics table, you enter a string that consists of
the following elements: "#<line number of DIALOG.A>". Depending on
MP7230.x, the texts is fetched from the specified line in DIALOG.A, and
displayed in the selection window. The line numbers of DIALOG.A are
identified by the preceding character #.
At present, utf8 characters cannot be displayed in the selection window.
If the entry in the DOC column is used as a keyword to make changes to the
kinematics by using WRITE TO KINEMATIC, the "#<line number of
DIALOG.A>" can be entered as KEY.
Example:
WRITE TO KINEMATIC AT COLUMN "HEIGHT" CAPTURE "DOC" KEY "#143" = 22
Each line of the assignment table contains information for referencing a
specific kinematics description. Format of the assignment table:
Column Input Description
NR 0, 1, 2 ... Automatic line numbering
MP7500 Integer (e.g. "3") or
bit-encoded (e.g.
%11)
Option selection for tilting the working
plane (depends on the activation of the
preset table). See the description of the
"Tilt Working Plane" feature.
FILE Path and file name
a
a. File paths should be entered as absolute paths. If only the file
name is entered, the kinematics path from OEM.SYS is valid
(e.g. KINEMATIC = PLC:\Kinemat\Kinelist.TAB).
Referencing of a description table for one
machine kinematics
MPFILE Path and file name
a
Referencing of a machine parameter
subfile, which is to be activated when
these machine kinematics are selected.
Relative paths can also be used when
entering MP subfiles in the MPFILE column.
The relative path always starts with the
folder in which the assignment table is
saved.
SUBFILE1
SUBFILE2
Path and file name
a
Referencing of two possible partial
description tables for each (selected)
kinematics description. These tables are
activated via the KEY column in the
description table and the SUBFILE1 or
SUBFILE2 keyword.
DOC Text Brief descriptive text for selection dialog of
the kinematics model via code number