30
1.2 Working with the iTNC 530 Programming Station
Exiting the programming station
Fundamentals
In order to avoid losing data when exiting the program, you must quit
the programming station correctly. The following sections describe
the two possibilities for doing this.
Exiting the programming station completely
U Select the Manual Operation mode
U Shift the soft-key row until the soft key for shutting down the
system appears
U Select the function for shutting down and confirm the
following dialog prompt again with the YES soft key
Exiting the programming station temporarily
U Press the Windows key on the ASCII keyboard for the screen to
display the last active application and the task bar
U Double-click the green HEIDENHAIN symbol to the lower right in
the task bar for the iTNC control panel to appear (see figure at right)
U Select the function for exiting the iTNC 530
application: Press the Stop iTNC button. The iTNC
control panel remains active. To restart the
programming station software, press the Restart
iTNC button
Inappropriate exiting of the programming station can lead
to data loss.
To Next Page
Loading...
