10 – 110 HEIDENHAIN Service Manual iTNC 530
10.4 Saving and Loading Recordings
You can save recorded oscillograms together with the related settings to files on the hard disk
of the iTNC 530. The files must have the extension *.DTA.
8 Record an oscillogram.
8 Exit the oscillogram by pressing the END soft key. --> You return to the setup screen for the
integrated oscilloscope.
8 Now press the SAVE SCREEN soft key. --> There appears a suggestion for the path and name
of an oscilloscope file in the header:
8 Press the ENT key. --> The file is created.
You can call saved oscillograms in the integrated oscilloscope at any time:
8 Now press the RESTORE SCREEN soft key in the setup menu. --> There appears a suggestion
for the path and name of an oscilloscope file in the header:
8 Press the ENT key. --> The oscillogram is displayed.
You can change the path and name of the oscilloscope file. The file extension must alway
be DTA.
This file can then be moved to an external data medium (e.g. using TNCremoNT or a USB
flash drive).
Enter here whether the oscillogram was filed under another name in another path.
To Next Page
Loading...
