HEIDENHAIN ITNC 530 - Page 178

13 – 178 HEIDENHAIN Service Manual iTNC 530
As of NC software 34049x-05:
8 Click the menu itemInterfaces in the window Network settings.
8 Click the Configuration button. --> The following window appears:
8 Enter a suitable IP address.
8 Enter the same subnet mask as that of your laptop.
8 Confirm by clicking OK in the window Configuring an interface.
8 In the window Network settings also click OK.
8 In the window Activate changes click Restart.
8 Now the control reboots, the new settings are active.
Note
We recommend using the IP address of the laptop and increasing the last place by one.
Example:
Address of the laptop 160.1.11.227
Address of the iTNC 530 160.1.11.228