4 – 22 HEIDENHAIN Service Manual iTNC 530
Display of the
error message
All error messages that can be acknowledged with the CE key are …
Displayed in the screen header (at the top of the screen) usually in red color.
As a plain-language message.
Figure: Error message in the header
The machine manufacturer can display additional information on PLC error messages in the
small PLC window (above the soft-key row).
Figure: Additional information in the small PLC window
Error messages that require a rebooting of the control ...
are displayed in a red or gray window (depending on the NC software version) in the center
of the screen.
are made known through a plain-language message.
Figure: Red error window
To Next Page
Loading...
