15 – 220 HEIDENHAIN Service Manual iTNC 530
15.2 Preparations
Who provides the
new Service Pack?
The machine manufacturer receives the service pack directly from HEIDENHAIN.
Service engineers and end users receive the new service pack from the machine manufacturer.
Preparing the
machine
8 Move machine to home position (axes, tool changer, tilting head, etc.).
Ask the machine operator!
8 Press EMERGENCY STOP.
8 Restart the control, do not acknowledge the Power interrupted message.
HEIDENHAIN recommends backing up the control data before loading a service pack. -->
See ”Backup on an External Data Medium” on page 13 – 192.
To Next Page
Loading...
