HEIDENHAIN ITNC 530 - Corrective Action

July 2010 20 – 343
20.1.9 Corrective action
Control If you have found that the interface on the CC is defective:
 Exchange the CC. --> See ”Exchange of the CC” on page 28 – 551.
Drive
components
If you have found that the power module, the compact inverter, the expansion card or the motor
is defective:
 Replace the drive component
--> See "Service Manual for Inverter Systems and Motors".
Mechanics If you have found that the fault is due to the mechancis of the machine tool:
 Replace mechanical components. --> Ask your machine tool builder.