29 – 562 HEIDENHAIN Service Manual iTNC 530
29.2 Test Adapter
Brief description The test adapter ...
Currently has the ID 375830-01.
Can be connected to all D-Sub and ribbon-cable connectors of HEIDENHAIN devices.
Requires adapter cables.
Has numbered banana jacks to which, e.g., a multimeter can be connected.
Permits signal and voltage measurement during the operation of HEIDENHAIN devices.
Has 5 prepared banana plugs with eyes to be clipped on the measuring lines. These banana
plugs are located at the upper right; if required, they can be plugged into the numbered banana
jacks.
Only one interface may be inspected on the test adapter!
To Next Page
Loading...
