HEIDENHAIN MANUALPLUS 620 - Page 1300

1300 HEIDENHAIN Technical Manual MANUALplus 620
AdditiveCompen
sation
[DB_ADD_
CORR1]
Display: Additive workpiece
compensation for X, Z and Y
If no workpiece compensation is active,
D=900 and the compensation
values=0.0000 are displayed in gray.
If workpiece compensation is active,
D=901 to 916 and the active compensation
values are displayed in black.
ActualToolData
[DB_TOOL_
CORR1]
Display: Tool compensation for X, Z, Y
and, if required, special compensation S
If a special compensation that is not active
(G148 O=0) is assigned to a tool, the
compensation value is displayed in gray.
If special compensation S is activated with
G148 O=1 (DX->DS) or O=2 (DZ->DS), the
S value is displayed and the assigned axis
letter is highlighted in blue.
Image Name Display/Attribute