January 2012 4.2 The "Machine Parameters" Mode of Operation 335
Displaying help
texts
The Info key enables you to call a help text for each parameter object or
attribute.
If the help text does not fit on one page (1/2 is then displayed at the upper
right, for example), press the HELP PAGE soft key to scroll to the second page.
Additional information, such as the unit of measure, the initial value, or a
selection list, is also displayed. If the selected machine parameter matches a
parameter in the iTNC 530, the corresponding compatible MP number is
shown.
To exit the help text, press the Info key again.
To Next Page
Loading...
