HEIDENHAIN MANUALPLUS 620 - Page 425

January 2012 4.10 List of Machine Parameters 425
CfgDashboardElemnt
Configuration of the dashboard elements
[Key name of the dashboard element]
e.g. DB_ADD_CORR1, DB_ALL_AXES1, etc.
dashboardpicType
113101
Image type of a dashboard element
Defines the image assigned to this dashboard
element.
Format: Selection menu
Input: Name of the dashboard element
RUN
LEVEL1
1294
attribut
113102
(optional parameter)
Attribute more closely describing the
dashboardpicType
Defines the attribute assigned to this dashboard
element.
Format: Numerical value
Input: 0 to 2147483647
RUN
LEVEL1
1294
entityList
113103
(optional parameter)
Key name as parameter for the selected
dashboardpicType
Defines the machining channel or axes to be
displayed in this dashboard element.
Format: List [0 to 40]
Input: Max. 18 characters
RUN
LEVEL1
1294
CfgDashboard
Configuration of the dashboard
[Key name of the dashboard]
e.g. DB_DEFAULT, DB_DEFAULT1, etc.
elementList
113201
List of dashboard elements, filled from the
CfgDashboardElemnt pool
Defines the dashboard elements to be contained
in a configured dashboard. For each dashboard
you enter the key names of up to 16 dashboard
elements.
Format: List [0 to 40]
Input: Selection menu
RUN
LEVEL3
1292
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page