HEIDENHAIN MANUALPLUS 620 - Page 426

426 HEIDENHAIN Technical Manual MANUALplus 620
CfgOemWindow
Position of the OEM windows in the dashboard
[Key name of the OEM window]
e.g. Dashboard_1, Dashboard_2, etc.
upperLeft
605201
(optional parameter)
Dashboard element number of upper left
corner of OEM window
The dashboard elements are counted from upper
left to right.
Format: Numerical value
Input: 0 to 19
PLC/Pgm
run is
locked
LEVEL1
1294
bottomRight
605202
(optional parameter)
Dashboard element number of lower right
corner of OEM window
The dashboard elements are counted from upper
left to right.
Format: Numerical value
Input: 0 to 19
PLC/Pgm
run is
locked
LEVEL1
1294
CfgCoordSystem
Setting the world coordinate system
coordSystem
114901
World coordinate system
Defines the coordinate system of the lathe. The
coordinate system influences the graphical
display in the ICP editor and of the support
graphics, as well as the position of the axes in the
simulation.
Format: Selection menu
Input: +X, +Z
–X, +Z
+X, +Z
+Z, –X
Default: +X, +Z
PLC/Pgm
run is
locked
LEVEL3
1388
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page