90 2 Installation and Specifications
2.3 Software setup
Supervisor password and program unlocking
The Supervisor screen contains the Password data field and Programs
Locking choice field.
Most setup parameters are password-protected and setup can only be
performed after the password is entered. To enter the supervisor
password:
U Press MENU/SETUP to display the setup menu and then highlight
the Supervisor menu item.
U Highlight the Password data field.
U Enter the supervisor password.
Program edit, copy and delete functions are locked by default. To
unlock program functions:
U Highlight the Programs choice field.
U Press the UNLOCK soft key.
U Press the FINISH key to save parameters and return to the setup
menu.
Highlight the Supervisor menu item Highlight the Password data field Enter the password
Highlight the Programs choice field Press the UNLOCK soft key to make
program editing available
To Next Page
Loading...
