ND 1200 QUADRA-CHEK 97
2.3 Software setup
Misc screen
The Misc screen contains fields for configuring:
Optical edge (OE) time-out: The minimum allowed time in
milliseconds between the detection of two edges. This time is
specified to prevent noise from being recognized as valid edges.
Optical edge (OE) debounce: The minimum time in milliseconds that
a light transition must be stable to result in a valid edge detection.
To configure edge detection in the Misc screen:
U Press MENU/SETUP to display the setup menu and then highlight
the Misc menu item.
U Highlight the OE Time-out (ms) data field and enter the minimum
time between valid edges in milliseconds.
U Highlight the OE Debounce (ms) data field and enter the minimum
time an edge transition must be stable in milliseconds.
U Press the FINISH key to save parameters and return to the setup
menu.
Enter OE Time-out Enter OE Debounce
To Next Page
Loading...
