Need help?Do you have a question about the HEIDENHAIN ND 780 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Number of Axes | 2 |
| Input Channels | 2 |
| Power Supply | 24 V DC |
| Display Size | 7-inch |
| Resolution | 0.001 mm |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Incremental Encoders | 1 Vpp, TTL |
| Input Signals | TTL |
| Display | Backlit |
Defines datums and absolute/incremental coordinate systems for positioning.
Explains encoder function and reference marks for position re-establishment.
Details screen layout, navigation keys, operating modes, and help functions.
Covers Job Setup, Units, Scale Factor, and Edge Finder settings.
Configures stopwatch, remote switch, console, language, and import/export.
Tool table operations, radius compensation, and tool calling.
Methods for setting datums using probing functions and manual entry.
Presetting positions, 1/2 soft key, and pattern functions for milling.
Tool table usage and setting offsets using TOOL/SET or NOTE/SET.
Datum setting in turning, using NOTE/SET, and radius/diameter display.
Mounting, electrical requirements, power wiring, and safety.
Encoder setup, error compensation, serial port, and counter settings.
RS-232 serial port, data transfer, measured output, specs, dimensions, and accessories.
To Next Page
