POSITIP 880 137
II – 5 Measured Value Output
Example 4: Probing function Edge Y = –3674.4498 mm
1 Coordinate axis
2 2 blank spaces
3 Colon
4 +/– sign or blank space
5 2 to 7 places before the decimal point
6 Decimal point
7 1 to 6 places after the decimal point
8 Unit: blank space for mm, “ for inches
9 R for radius display, D for diameter display
10 Carriage return
11 Blank line (Line Feed)
Example 5: Probing function Centerline
Coordinate of centerline on X axis CLX = + 3476.9963 mm (Center
Line X axis)
Distance between the probed edges DST = 2853.0012 mm (Distance)
1 Colon
2 +/– sign or blank space
3 2 to 7 places before the decimal point
4 Decimal point
5 1 to 6 places after the decimal point
6 Unit: blank space for mm, " for inches
7 R for radius display, D for diameter display
8 Carriage return
9 Blank line (Line Feed)
Y :-3 6 7 4 . 4 4 9 8 R <CR> <LF>
1234 5 6 7 89 10 11
CLX
:+3 4 7 6 . 9 9 6 3 R <CR> <LF>
DST
: 2 8 5 3 . 0 0 1 2 R <CR> <LF>
12345678 9
To Next Page
Loading...
