HEIDENHAIN TNC 370 D - Tapping

4–70 TNC 370 D Machine Parameters July 02
4.12 Tapping
Machine
parameter
Function and input Change via Reaction
MP7110.0 Minimum for feed-rate override during
tapping
Input: 0 to 150 [%]
PLC
RUN
MP7110.1 Maximum for feed-rate override during
tapping
Input: 0 to 150 [%]
PLC
RUN
MP7120.0 Dwell time for reversal of spindle rotation
direction
Input: 0 to 65.535 [s]
PLC
RUN
MP7120.1 Advanced switching time of the spindle for
tapping with coded output of the spindle
speed
Input: 0 to 65.535 [s]
PLC
RUN
MP7120.2 Spindle slow-down time after reaching the
total hole depth
Input: 0 to 65.535 [s]
PLC
RUN
MP7130 Approach behavior of the spindle for rigid
tapping
Input: 0.01 to 10.000 [°/min]
PLC
MP7150 Positioning window of the tool axis for rigid
tapping
Input: 0.001 to 2.000 [mm]
PLC
MP7160 Spindle orientation with Cycle 17
Input:
0= spindle orientation before execution of
Cycle 17
1= no spindle orientation before execution
of Cycle 17
CN
PLC
RUN