HEIDENHAIN TNC 370 - Touch Probes and Digitizing

12 Tables, Overviews and Dialogs
12.1 General User Parameters
30 Touch probes and digitizing
Select signal transmission type
d
MP6010 Touch probe with cable transmission: 0
Touch probe with infrared transmission: 1
-‘
Probing feed rate for TS 120/TS 630
MP6120 60 to 3 000 Imm/minl
Maximum traverse to first probe point
MP6130 0 to 99 999.9999 tmml
Safety clearance over probe point during automatic measurement
MP6140 0 to 99 999.9999 [mm]
Rapid traverse for probing with TS 120/TS 630
MP6150 1 to 300 000 linm/minl
12-4
TNC 370