HEIDENHAIN TNC 426 PB - Load String (L); Add String (+); Saving a String (=)

7 – 152 HEIDENHAIN Technical Manual TNC 426, TNC 430
7.9.1 LOAD STRING (L)
Syntax: L (LOAD)
Operands: S <arg>
Action:
Load the string accumulator. The string that the TNC is to load is selected
through the argument <arg> after the operand designation. See also
“Operand declaration.”
Example:
See command OVWR.
7.9.2 ADD STRING (+)
Syntax: + (PLUS)
Operands: S <arg>
Action:
Attach another string to a string in the string accumulator. The string that the
TNC is to load is selected through the argument <arg> after the operand
designation. See also “Operand declaration.” The resulting string must not be
longer than 128 characters.
Example:
See command OVWR.
7.9.3 SAVING A STRING (=)
Syntax: = (STORE)
Operands: S <arg>
Action:
Assign the content of the string accumulator to the string memory. The
memory into which the TNC is to copy the string is selected through the
argument <arg> after the operand designation. Permissible arguments:
0 to 7 (String memory S0 to S15). See also “Operand declaration.”
Example:
See command OVWR.