HEIDENHAIN TNC 426 PB - Page 302

4 – 64 HEIDENHAIN Technical Manual TNC 426, TNC 430
MP7510 Transformed axis
Format: %xxxxxx
Input: 0: End of the transformation sequence
Bit 0 corresponds to axis X
Bit 1 corresponds to axis Y
Bit 2 corresponds to axis Z
Bit 3 corresponds to axis A
Bit 4 corresponds to axis B
Bit 5 corresponds to axis C
PLC
RUN
6 – 82
MP7510.0-14 Transformation 1 to transformation 15
MP7520 Additional code for transformation
Format: %xx
Input: Bit 0 – Tilting axis
0: Swivel head
1: Tilting table
Bit 1 – Type of dimension in MP7530
0: Incremental dimension for swivel head
1: Absolute, relative to the machine datum
for the tilting table
PLC
RUN
6 – 82
MP7520.0-14 Transformation 1 to transformation 15
MP7530 Type of dimension for transformation
Input: -99 999.9999 to +99 999.9999
0: Free tilting axis
PLC
RUN
6 – 82
MP7530.0-14 Transformation 1 to transformation 15
MP7550 Home position of the tilting element
Input: -99 999.9999 to +99 999.9999
280 474-01
PLC
RUN
6 – 82
MP7550.0 A Axis
MP7550.1 B Axis
MP7550.2 C Axis
MP Function and input Software
version and
behavior
Page