HEIDENHAIN TNC 430 PA/M - Subtraction [ ] (-[ ]); Multiplication [ ] (X[ ]); Division [ ] (;[ ]); Remainder [ ] (MOD[ ])

December 2001 Commands 7 – 131
7.7.45 SUBTRACTION [ ] (–[ ])
Syntax: –[ ] (MINUS –[ ])
Operands: None
Action:
See example for ADDITION [ ]
7.7.46 MULTIPLICATION [ ] (X[ ])
Syntax: x[ ] (MULTIPLY [ ])
Operands: None
Action:
See example for ADDITION [ ]
7.7.47 DIVISION [ ] (/[ ])
Syntax: /[ ] (DIVIDE [ ])
Operands: None
Action:
See example for ADDITION [ ]
7.7.48 REMAINDER [ ] (MOD[ ])
Syntax: MOD[ ] (MODULO [ ])
Operands: None
Action:
See example for ADDITION [ ]