HEIDENHAIN TNC 430 PA - Entering Miscellaneous Functions M and STOP

3 – 52 HEIDENHAIN Technical Manual TNC 426, TNC 430
X8: Analog output For connecting cables, see “Cable Overview” at end of chapter.
Pin layout on logic unit and connecting cable:
Logic unit Connecting cable
D-sub
connctn.
(female)
15-pin
Assignment D-sub
connctr.
(male)
15-pin
Color
1 Analog output 1: ±10 V 1 Brown
2 Do not assign 2 Brown/Green
3 Analog output 2: ±10 V 3 Yellow
4 Analog output 5: ±10 V 4 Red/Blue
5 Analog output 3: ±10 V 5 Pink
6 Analog output 5: 0 V 6 Gray/Pink
7 Analog output 4: ±10 V 7 Red
8 Analog output 6: ±10 V 8 Violet
9 Analog output 1: 0 V 9 White
10 Do not assign 10 White/Gray
11 Analog output 2: 0 V 11 Green
12 Do not assign 12
13 Analog output 3: 0 V 13 Gray
14 Analog output 4: 0 V 14 Blue
15 Analog output 6: 0 V 15 Black
Housing External shield Housing External
shield