December 2001 List of Machine Parameters 4 – 47
MP6570 Max. permissible surface cutting speed at the tooth edge
Input: 1.0000 to 129.0000 [m/min]
PLC, CN123 6 – 376
MP6572 Maximum permissible speed during tool measurement
Input: 1 to 1000 [rpm]
0: 1000 [rpm]
280 476-09
PLC, CN123
RUN
6 – 376
MP6580.0-2 Coordinates of the TT 130 probe contact center with
respect to the machine datum (traverse range 1)
Input: -99 999.9999 to +99 999.9999 [mm]
PLC, CN123 6 – 373
MP6581.0-2 Coordinates of the TT 130 probe contact center with
respect to the machine datum (traverse range 2)
Input: -99 999.9999 to +99 999.9999 [mm]
PLC, CN123 6 – 373
MP6582.0-2 Coordinates of the TT 130 probe contact center with
respect to the machine datum (traverse range 3)
Input: -99 999.9999 to +99 999.9999 [mm]
PLC, CN123 6 – 373
MP6585 Monitoring the position of the rotary and additional linear
axes during the tool measurement cycles
Format: %xxxxxx
Input: 0: Axis is not monitored
1: Axis is monitored
Bit 0 – A axis
Bit 1 – B axis
Bit 2 – C axis
Bit 3 – U axis
Bit 4 – V axis
Bit 5 – W axis
280 476-01
PLC, CN123
6 – 376
MP6586 Ref. coordinate for monitoring the position of the
rotary and additional linear axes during the tool
measurement cycles
Input: -99 999.9999 to +99 999.9999 [mm or °]
280 476-01
PLC, CN123
6 – 376
MP6586.0-5 Axes A to W
MP Function and input Software
version and
behavior
Page
To Next Page
Loading...
