Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don’t need the
same temperature settings to stay comfortable). This function can only be activated
via remote control. Press the SLEEP button when you are ready to go to sleep. When in
COOL mode, the unit will increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F) after another hour. When in HEAT mode,
the unit will decrease the temperature by 1°C (2°F) after 1 hour, and will decrease an
additional 1°C (2°F) after another hour. It will hold the new temperature for 5 hours,
then the unit will turn off automatically.
Note: The SLEEP function is not available in FAN or DRY mode.
To Next Page
Loading...
Need help?
General
