Heinner HSVC-V21.6GRY - Charge Base Assembly and Removal

www.heinner.com 110W, 100-240V~50Hz
2
NOTES: When using the machine, please install filter
2. Press the hand-held lock, remove the hand-held; press the dust barrel lock, remove the dust
barrel, check the filter if it is inside; re-install the dust bucket; installation on the hand-held.
Charge base assembly
Fit the back inot the charge base
Remove the back from the charge base
Press the knob at the bottom of the base
and pull out the back
knob
Figure 1
Figure 2
Figure 3