Digital Network Public Address & Voice Alarm System
HEINRICH
HEINRICH LIMITED, 71-75 SHELTON STREET COVENT GARDEN LONDON
T: +442032860291 W: www.heinrichlimited.com E: info@heinrichlimited.com
1. Dear Readers
Thank you for using HEINRICH re voice broadcasting system, in order to facilitate your understanding
and the manual’s description, suggestion are as follows:
The mentioned "Voice information" in the manual includes
Built-in EVAC, ALERT voice.
Built-in paging and PSTN voice menu prompt tone.
Built-in BGM, line input audio and remote paging audio.
Note: The qty of voice information of EVAC / ALERT / BGM / PROMPT memory cards cannot exceed 100.
The system control priority
When conguring audio operation priority, please follow the principle that manual rst, then automatic,
local rst, then remote.
Recommend to make Mic PTT and EVAC voice conguration with a higher priority. It has total 39 kinds of audio signal
system, in consideration of the network bandwidth, only 24 dierent audio signal can be sent to the system partitions,
audio priority can be congured through software (when congured with backup host, the priority of the audio signals
come from one host can be the same, the priority of the audio signals come from diferent hosts must be dierent).
Some icons are described as belows
—Loop playback.
—Single cycle.
—Order play.
—Single player.
—Random Play.
—Click to adjust the output level of the current partition (It is invalid for EVAC voice and zone paging broadcasting).
—Represent the current partition output muted (volume output is 0).
—Click for monitoring audio signal of current partition.
—It means audio signal of current partition is monitored.
—Equipment or module fault appears in the system.
—It indicates that the system is currently operating in an emergency mode.
—It represents that the host is oine.
—It indicates that the network is connected.
—It represents the host starts the PSTN calling function.
—It indicates that MIC is calling.
—Green indicates that the module is working.
—Yellow indicates module failure.
—Grey indicates that the module is normal.
To Next Page
Loading...