Need help?Do you have a question about the helena SAS-3 and is the answer not in the manual?
General| Brand | helena |
|---|---|
| Model | SAS-3 |
| Category | Laboratory Equipment |
| Language | English |
Overview of the SAS-3 as an electrophoresis instrument for Helena Biosciences Europe agarose products.
Explanation of warning, caution, and WEEE symbols used in the manual.
Important safety precautions and operational limitations for using the SAS-3.
Guidelines for safe operation, including electrical safety and avoiding instrument damage.
Description of the rocker-type ON/OFF switch for the unit's power input.
Details of the LCD display, LED indicator, and control buttons on the front panel.
Description of internal parts like Electrode Posts, Reagent Dump Bar, and Applicator Assembly.
Procedure for connecting and switching on the SAS-3 instrument.
How to navigate program menus and start a test or specific step.
Steps required to prepare the SAS-3 for the intended application.
Verifying setup and initiating an electrophoresis application run.
Instructions for creating new or modifying existing test programs.
Monitoring active process parameters displayed during a program run.
How to stop an electrophoresis program at any stage.
Select the display language from English, French, German, Italian, or Spanish.
View and manage the available tests in the test menu.
Set the desired volume level for the instrument's buzzer.
Enable or disable audible beeps for key presses.
Configure patient ID verification using a barcode reader.
Enable detection of reagent bottles, sounding an alarm if absent.
Revert instrument settings to the original factory defaults.
Adjust the contrast of the display for better readability.
Display the current software version number.
Procedure for cleaning the electrophoresis reaction plate after use.
Instructions for cleaning the SAS-3 Carbon Electrode with deionised water.
How to clean the SAS-3 Reagent Spreader after each use.
Cleaning the SAS-3 Antisera Template with detergent and water.
Procedure for cleaning the sample tray if contaminated.
Safe methods for cleaning spills from the instrument.
Step-by-step guide to safely replace the instrument's fuses.
Detailed instructions for replacing the contact sheet on the reaction plate.
Advice on lubricating hinges when the lid operates stiffly.
To Next Page
