Hella Xenon User Manual

5
Before starting installation, read
these Installation and operating
instructions through completely
and observe the sequence of
installation steps precisely.
Improper installation can
endanger the operating safety of
your vehicle.
Table of
Contents
Installation Instructions
for Xenon retrofit kit
Removing old headlamps Page 12-13
Wiring harness for Xenon lamps Page 14-19
Sensor wiring harness Page 20-25
Sensor installation Page 26-29
The newly primed headlamp covers
should be painted to match the
colour of the car before installation.
Observe drying times!
Installation instructions
for lens cleaning
system
Disassembly Page 32-35
Cutting out nozzle openings Page 36-37
Routing hoses Page 38-41
Removing water reservoir Page 42-47
Electrical connection Page 48-51
Installing new water reservoir Page 52-57
Assembly Page 58-63
Final assembly
Electrical connection Page 64-67
Assembly Page 68-71
Final adjustment Page 72-75
Installation tools
required:
Xenon
retrofit
kit
Headlamp
cleaning
system
Car jack X X
Box/open-end
wrench XX
8/10/13mm
Lug wrench X X
Allen
wrench X –
5 mm
Phillips
screwdriver X X
Straight
screwdriver X X
Torx wrench
T10/15/20/25 X X
Torx wrench
T50 – X
Socket
wrench – X
Combination
pliers X X
Side cutters X X

Hella Xenon Specifications

General

Voltage	85V
Wattage	35W
Color Temperature	4300K
Luminous Flux	3200 lm
Light Source	Xenon