18
Step 1:
Base, rod with telescopic and electrical switch box assembly
Electrical
box
Telescopic rod
Screw
Fixing rod
Stand base
•
Assembly the wheels on the stand feet (wheels front, wheels back) with the appropriated screws, nuts,
washer and springs).
Fix both metal bar with wheel and assembly on the rear stand base.
• Fix the fixing rod on the stand feet (screw is pre-assembled). Secure it is firmly tighten.
•
Slide the telescopic rod with the tapered end of the fixing rod and pull the telescopic tube out max. until
it stops and
tighten the adjustable height knob firmly.
• Loosen the pre-assembled fixing elements on the electrical switch box and place them of the
telescopic rod. Tigthen the fasteners securely and make sure all parts are well and firmly
connected. Now you can start with the next step.
Step 2:
Assembly water tank, pump, water pipes connection and electrical power cords and pump
electrical power cord connection
To Next Page
Loading...
