4
BATTERY BACKUP SYSTEM
The Battery Backup System ensures the clock and alarm settings to be retained during a power
interruption or power outage (in order to preserve the battery life the Display will not light). All clock
settings will be kept in memory, however, the clock time may require adjustment for exact accuracy
once the power resumes. If a battery is not installed, the Display will be flashing “12:00” when the
power is restored. This indicates that you have to set up the time and alarm settings again.
BATTERY INSTALLATION
Note: For optimum performance an alkaline-type battery is recommended.
1. Open the battery compartment door on the bottom of the cabinet then
connect one type 6LR61 9V battery to the Battery Clip located inside.
Note: The battery clip only fits one way to ensure the correct polarity.
2. Replace the Battery Compartment Door.
IMPORTANT
: Be sure that the battery is installed correctly. Wrong
polarity may damage the unit.
BATTERY CARE
If the unit is not to be used for an extended period of time, remove the battery. Old or leaking
battery can cause damage to the unit and will void the warranty.
Do not try to recharge batteries not intended to be recharged; they can overheat, rupture and
leak. (Follow battery manufacturer’s directions.
Do not dispose of batteries in fire, batteries may leak or explode.
LOCATION OF CONTROLS AND INDICATORS
1. SNOOZE BUTTON 9. VOLUME CONTROL
2. ALARM BUTTON 10. FM WIRE ANTENNA
3. TIME BUTTON 11. AUTO INDICATOR
4. SLEEP BUTTON 12. AC CORD
5. HOUR BUTTON 13. AM/FM BAND SELECTOR
6. MINUTE BUTTON 14. AUX IN JACK
7. FUNCTION SELECTOR
(ON/OFF/AUTO/ALARM)
15. PM INDICATOR
8. TUNING CONTROL
To Next Page
Loading...
