Hello Kitty SPORTS CAR - Motorhood, Seat, and Battery Installation; Battery Safety Information

11
8. Motorhood Assembly
. Take out the motorhood from polybag.
. Install the motorhood in the proper position as shown,
and secure it with four 4x12 flat head screws.
9. Seat Assembly
. Insert the tabs on the back of the seat into the slots in
the vehicle body.
. Insert two M5x16 machine screws, and tighten
securely with a screwdriver.
10. Connect Audio Input Cable
. Plug the audio input cable on AUX line-in jack on the
vehicle. (You can connect the cable with an audio
device or MP3 player whenever you want to play.)
Note: For long term use, please remember to
store the audio input cable in a safe place when
not in use.
Battery Safety Information:
Batteries may leak fluids that can cause chemical burn injury or ruin your product.
To avoid battery leakage:
● Install batteries correctly, observing the polarity (+,-) signs to avoid leakage.
● Do not mix old and new batteries.
● Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
11. Install Steering Wheel Batteries
(Note: Batteries not included)
1. Loosen the screw in the steering
wheel and remove the cover.
2. Insert 2 x 1.5V size AA AM-3 or LR6
batteries as shown.
3. Replace the cover and tighten the
screw to secure it in place.