Hello Kitty SPORTS CAR - Maintenance and Repair; Wheel and Gearbox Replacement

To Next Page

To Previous Page

DETAILED MAINTENANCE AND REPAIR

Turn power “OFF” before conducting any maintenance procedures.

HOW TO REPLACE FRONT WHEELS & REAR LEFT WHEEL

1. Remove the Axle Cap with a ﬂat head screwdriver.

2. Remove the M10 locknut with a 17mm socket wrench.

3. Remove the Ø12 washer.

4. Remove the wheel, then replace with a new one and make sure the Ø12 bushing

sits inside the wheel.

5. Remount the Ø12 washer, M10 locknut and securely tighten the wheel; then

re-insert the axle cap.

Tools Required: Flat head Screwdriver

(not included)

17mm Socket Wrench

(included)