To Next PageTo Next Page
Need help?Do you have a question about the Helmer Scientific TCR and is the answer not in the manual?
General| Brand | Helmer Scientific |
|---|---|
| Model | TCR |
| Category | Laboratory Equipment |
| Language | English |
Explains the meaning of various safety symbols found on the chart recorder.
Provides essential safety guidelines for using and handling the chart recorder.
Details crucial safety measures related to electrical hazards when working with the recorder.
Outlines necessary precautions for handling chemicals and biological materials.
Identifies and describes the external parts of the standalone chart recorder cover and stand.
Details the front components of the chart recorder assembly.
Describes the components located on the rear of the chart recorder.
Instructs on recording serial numbers and other identification details for service reference.
Provides criteria for choosing a suitable and safe location for installing the chart recorder.
Guides on how to position standalone chart recorders on surfaces.
Details how to adjust the viewing angle of the chart recorder using the adjustment knob.
Explains procedures for mounting the chart recorder onto a wall or beneath a cabinet.
Step-by-step instructions for securely mounting the chart recorder on a wall.
Instructions for mounting the chart recorder beneath a cabinet.
Covers the procedures for connecting and safely disconnecting the chart recorder from power.
Explains how to connect the backup battery for continuous operation during power outages.
Guides on selecting the correct temperature range setting for accurate recording.
Details the process for installing new chart paper and replacing used paper.
Explains how to calibrate the chart recorder for accurate temperature readings.
Describes the startup process and initialization sequence of the chart recorder.
Explains how temperature markings fluctuate and what is considered normal variation.
Details the meaning of different LED patterns and their relation to the recorder's status.
Outlines recommended maintenance tasks and their frequencies for optimal performance.
Provides instructions for replacing the backup battery when its power is low.
Describes the procedure for cleaning the chart recorder, specifically for standalone units.
Offers solutions for common operational problems encountered with the chart recorder.
Addresses specific issues like paper not rotating or recorder not receiving power.
Helps diagnose problems based on LED status, such as constant or flashing red/green lights.
Guides on resolving issues related to the stylus not marking or marking incorrectly.
Explains how to run a test pattern to verify the recorder's mechanical functions.
Provides instructions for removing the rear panel of standalone units for access.
Details methods for restarting the chart recorder to resolve electronic issues.
Describes how to test the probe circuit to identify potential faults.
Lists available replacement parts and their part numbers for servicing the recorder.
Provides detailed technical data including power, weight, size, and operating conditions.
Details energy conservation, WEEE compliance, and CE conformity for European countries.
Presents circuit diagrams for the chart recorder in different configurations.
Outlines warranty terms, service contacts, and procedures for the USA and Canada.
