2
Technical specifications:
• Voltage: 400V – 415V 3N~ 50Hz (230V – 240V 1N~ 3.4 – 7.7 kW).
• Power alternatives: 3.4kW-14kW.
• Enclosure rating: IP 20.
• Installation mounting: Floor/Wall.
• Water tank material: Aisi 316, acid-resistant steel.
• 2-phase control for thermal resistance. (Not in the special Belgian version)
• Steamer dimensions: 520 x 380 x160 mm
Easy to use:
• Automatic discharge and flush programme.
• Automatic fill and water level control.
• Floor or wall mounting.
• Digital control panel.
- Temperature control
- Time setting
- Light control
• Control panel can be installed inside the steamroom.
• Magnetic valve equipped with a large discharge port, allowing larger contaminants and lime
deposits to be flushed from the tank after each use. (Accessory)
Easy to maintain:
• Replaceable resistors (3 pcs), 1 of which is equipped with a thermal fuse.
• Lime remover (citric acid) fill port is conveniently located on top of the steam generator.
• Components can be easily replaced:
- Circuit board
- Thermal resistors
- Surface level sensor
To Next Page
Loading...