Add devices in AP Mode (If failed in Easy Mode, user could use AP mode)
n Press the power button for more than 5 seconds until the indicator begins to ash quickly, then press
it for another 5 seconds until the indicator ashes slowly.
n Tap “+” on the top right of the app. Select Device Type.
n Tap “AP Mode” on the top right, “conrm indicator slowly blink”. It will fetch the password of the Wi-Fi
networks on which your mobile phone is connected.
n Tap “Conrm” and “Connect now” to go to the WLAN setting interface in your mobile phone.
n Select the Wi-Fi network named “Helo_xxx” to connect it.
n Return to the “Helo by Strong” app, the connection will start automatically.
n When appears “successfully add 1 device”, then the connection is completed and your device is listed
in in your app list.
3
English
To Next Page
Loading...
Need help?
General