Hengstler eXtendo X-80 - Controls and Connectors Location

95 pages

To Next Page

To Previous Page

eXtendo

Em ulation Command Set Reference

Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 11 of 95

2.1.3 CR Carriage Return

[Name] Carriage Return

[Function] This command resets the printing position to the leftmost column on the same line.

[Code] [0D]

[13]

[Description]

1. The “CR” command resets the printing position to the leftmost column on the same line. Please

note that it does not cause the line to print. Use the Line Feed (LF) command to print the current

line and advance to the next line.

Other manuals for Hengstler eXtendo X-80